As a 18650 3.7 v Battery Factory, share with you.
1. The lithium battery pack cannot be charged.
The lithium battery pack in a pure electric vehicle cannot be charged when the battery is charged. The reasons can be divided into: wrong charging head or common failure of the charging head; rain shield maintenance or lithium battery protection board invalid; lithium battery pack and high-power electrical appliances Short circuit outside.
18650 Battery 3.7 V 2500mah
After solving the safety hazards, we searched successively: Is the charging head connected incorrectly, whether the positive and negative power plugs of the lithium battery pack are connected incorrectly; eliminate the maintenance of the lithium battery protection board of household appliances, restart the MOS tube, and accurately Measure whether the MOS tube has the operating voltage of the driver; check whether the wiring is broken.
2. Lithium batteries cannot be discharged.
The lithium battery pack in a pure electric vehicle cannot be charged and discharged normally during application. The reasons are as follows: the working voltage of the lithium battery pack is low; the rain shield or the control board is maintained; the rain shield or the control board is damaged; positive and negative charge and discharge Wrong connection; the line is disconnected or the power switch is not turned on.
3. Lithium battery is not fully charged
When the lithium battery pack of pure electric vehicle is used in the circulatory system, the battery is not charged when the lithium battery pack is disconnected. The charging of the battery is terminated when the working voltage is disconnected. This is due to the inconsistent power consumption or volume of a single string of lithium battery packs. If the power consumption is large or small, the lithium battery protection board is used to maintain the battery after charging, so that other strings of rechargeable batteries terminate the entire battery charging process before being filled.
Under such conditions, the balance charging head can be used to charge the lithium battery pack to keep the working voltage of each string consistent. If the volume difference is large, the rechargeable battery with a large difference must be replaced. But the key is to carry out volume inspection and matching of lithium batteries before assembling lithium batteries, otherwise the inconvenience of serial connection and disassembly will occur.
4. The battery life is short.
The lithium battery pack in a pure electric vehicle will quickly release current when it is used. The reason is: the rechargeable battery is not filled; the working voltage volume of a single string varies greatly; the lithium battery pack has a micro-short circuit failure or the lithium battery pack self-releases current Large, causing the lithium battery pack to run out as soon as it is fully charged. Regarding the above-mentioned poor rechargeable batteries, lithium batteries can be recharged or replaced with poor rechargeable batteries.
5. The voltage of the lithium battery is unstable.
The lithium battery pack of pure electric vehicles is composed of several lithium batteries in series and parallel, and the consistency of lithium batteries is very high. Although the manufacturers of lithium battery packs have done the matching of lithium batteries, due to the error of the rechargeable battery, the working voltage of each string of rechargeable batteries will be inconsistent during the whole process of long-term application of the lithium battery pack. Our company also has 18650 Battery 3.7 V 2500mah on sale, welcome to contact us.